R&M Manufacturing, Inc.                                                                                                                                                                            

	Premier Series Reverse Osmosis
Premier Series

The Premier R.O. Drinking Water Systems effectively reduce
harmful contaminants*, turning everyday tap water into the
water that nature intended for us to drink.  Fresh, natural,
life-sustaining water.

The Pure-Tel R.O. Systems contains the patented manifold
plate which directs the flow of water through each of the 
filtration steps.  The manifold design simplifies as it
enhances the system by eliminating the need for individual
connections between filtration stages.  The external in-out
quick connection fittings simplify installation by locking
tubing into place easily, quickly and securely.

The Pure-Tel R.O. System is designed to produce worry-free
R.O. water with full, the automatic shut-off device is
triggered and signals the system to automatically cease
production until more water is needed.

These technologies have been the secret to the success of
the Pure-Tel R.O. System.  With 50 years of water treat-
ment experience behind the Pure-Tel name, there is a
long-standing tradition of excellence and quality.

Prefiltration:
When water first enters the Pure-Tel R.O. System, It 
flows through a prefilterthat protects the automatic
shut-off and membrane from clogging with debris.
The job of the prefilter is to filter out larger particles
such as silt, rust or scale,extending the life of your 
R.O. membrane and allowing ti to tackle the smaller
contaminants.

In the Pure-Tel C.T.A. System, the prefilter is made of 
polypropylene fibersthat are spun together so tightly that
they trap particles.

If you have a Pure-Tel T.F.C. System,the prefilter also 
has activated carbon in it.  Not only does the tremendously
porous activated carbon remove chlorine particles, (which
is necessary to protect the refined T.F.C. Membrane), it
serves to filter out other contaminants as well.

The Membrane:
Water then travel to the operational center of the system-
the membrane. Here, most particles too small to be trapped
by the prefilter are removed from the water stream and
rinsed to the drain

The membrane's microscopic pores allow Hydrogen and Oxygen
molecules through, (and water is H20).  The majority of the
dissolved solids and other contaminants are flushed into
the drain's water stream and exit the system.

All Pure-Tel R.O. Systems have our patented seal on each
membrane.  The seal is designed to assure worry free 
installation, simplify system maintenance and reduce your
service costs.

The "Final Polish":
After the membrane, the R.O. water is routed to the holding
tank.  Our tank holds approximately 2 gallons of fresh,
clean water and the automatic shut-off tells the system
when it's time to make more!  When you turn on the Pure-Tel
faucet and draw water from the holding tank, it then goes
through its final stage of filtration, a carbon filter, to
remove any remaining tastes and odors before reaching your
glass.  The carbon impartsthe final "sweet" polish to your
water.